What raptor liner colors are available1/13/2024 RAPTOR Adhesion Promoter Aerosol is recommended. An Adhesion Promoter is required for proper adhesion. Flexible Plastic (TPO, EDPM, & PP): Abrade with 180-320 grit.Rigid Plastic (ABF, SMC) and fiberglass: Abrade with 120-180.RAPTOR Anti-Corrosive Epoxy Primer is recommended. Large exposed areas of bare metal: A full 2K primer system is required for optimum adhesion and corrosion resistance.Localized rub-thrus: prime with an etch primer, such as two coats of RAPTOR Acid Etch Primer Aerosol.Aluminum, bare metal, and galvanized: Abrade with: Bare metal 80-180 Aluminum/Galvanized 120-180.For hard to reach areas, like internal corners, etc., coat first with a suitable adhesion promoter, like RAPTOR Adhesion Promoter Aerosol, for optimal adhesion.Disclaimer: One tint package is used for everyone 1L bottle. The image on this page has the RAL color that is the exact equivalent to the color you need. You can order what we have or a similar color with our 3oz Tint bottles. Abrade the surface with the required grit sand paper (see below). 29.00 We currently have limited supplies of our 1.5oz Raptor Tint pouches.Remove all loose material and any rust from the surface to be coated.the colours will be represented differently. To achieve best results with RAPTOR, good preparation is essential. 4000ML 400ML tint in any Raptor UP Colour, and a 4 Bottle Raptor kit with hardener.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |